While gel blasters are a lot of fun to use and play with, you also want to make sure you care for them in the right manner for the best outcome. If you invest in one and own a gel blaster then you’re going to want to make sure you keep it in good condition so it works well.
You might have a gel blaster yourself but you may not know what you can be doing to ensure it stays working and functioning properly in the future. The good news is that you’re in the right place to learn more about gel blaster maintenance tips for long-term use so that you can get the most out of it over the years.
Clean it After Each Use
One maintenance tip for long-term use is to clean your gel blaster right after each time you bring it out and use it. It’s an effective way to prevent wear and tear and a great way to make sure that you remove all debris and dirt from your gel blaster. This way your gel blaster will function as it should when you go to use it the next time around. Get the right tools and supplies and then commit to making cleaning your gel blaster part of the process each time you use it.
Use Proper Storage
For the best results, you should also store your gel blaster in a cool and dry place. Take good care of your gel blaster by not just tossing it anywhere when it’s not in use. Heat and humidity can eventually destroy the plastic that it’s made out of. Select a temperature-controlled place that is free from sunlight, heat, and moisture. You may also want to consider storing it in a bag and a case for even better and more protection.
Lubricate the Moving Parts
It doesn’t matter if you’re experienced and use your gel blaster all the time or every so often, you must lubricate all the moving parts regularly. Pay special attention to the trigger area which has springs and bolts. It’ll run more smoothly this way so that you get optimal performance from your gel blaster time and time again.
Soak Gel Balls for A Minimum of Four Hours
Before putting them in your gel blaster and using them, your gel beads should be soaked for a minimum of four hours. They are less likely to cause any damage this way since it will ensure they’re properly hydrated. If you don’t soak them for this length of time beforehand then you risk the beads exploding in the chamber even when you aren’t firing.
Only Use High-Quality Gel Beads
It’s also important that if you want to maintain your gel blaster properly that you only use high-quality gel beads in it. It’s worth the investment to upgrade your gel beads and use good ones that have a solid reputation. Otherwise, you risk damage to your gel blaster as time goes on. Purchase certified gel beads that are made for your gel blaster and designed with high-quality materials so that you don’t experience any issues with your gel blaster down the road. You should know that not all gel beads are created the same and your performance of the gel blaster can be impacted by the type of gel beads you choose to use.
Be Present When You’re Charging the Batteries
Never leave your gel blaster unattended when you are charging the batteries. It should take roughly two hours to charge so make sure you plan for it accordingly. Be mindful that if it is overcharged or overheated, there may end up being damage to the battery itself. Avoid experiencing any damages to your gel blaster and the possibility of accidents by being home and nearby your gel blaster as you charge it. It’s important that you keep a close eye on it during this time.
Inspect Your Gel Blaster Visually Before & After Every Use
It’s also good practice that you visually inspect your gel blaster after each use. What you are doing is looking for the sign of any cracks or if there is damage to the gel blaster itself. Once you are done using it for the day then you should also identify if there are any signs of wear and tear to your gel blaster. If you do notice that anything is off, damaged, or not working right then you should consider taking the gel blaster to a professional who can evaluate it further and let you know how to repair it and any next steps.